IHTH-0750IZ-5A www.vishay.com vishay dale revision: 15-feb-16 1 document number: 34348 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high current through hole inductor, high temperature series manufactured under one or more of the following: ? us patents; 6,198,375/6,204, 744/6,449,829/6,460,244. ? several foreign patents, and other patents pending. notes (1) all test data is refere nced to 25 c ambient (2) operating temperature range -55 c to +155 c (3) dc current (a) that will cause an approximate ? t of 40 c (4) dc current (a) that will cause l 0 to drop approximately 20 % (5) the part temperature (ambient + temp. rise) should not exceed 155 c under worst case operatin g conditions. circuit design, component placement, pwb trace size and thickness, airflow and other cooling provisions all affect the part temperature. part temperature should be verified in the end application. features ? shielded construction ? excellent dc/dc energy storage up to 1 mhz to 2 mhz ? filter inductor applications up to srf (see standard electrical specifications table) ? handles high transient current spikes without saturation ? ultra low buzz noise, due to composite construction ? high temperature, up to 155 c ? aec-q200 qualified ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? engine and transmission control units ? diesel injection drivers ? dc/dc converters for entertainment/navigation systems ? noise suppression for motors - windshield wipers - power seats - power mirrors - heating and ventilation blowers - hid lighting ? led drivers standard electrical specifications l 0 inductance 20 % at 100 khz, 0.25 v, 0 a (h) dcr typ. 25 c (m ? ) dcr max. 25 c (m ? ) heat rating current dc typ. (a) (3) saturation current dc typ. (a) (4) srf typ. (mhz) 0.47 0.47 0.52 83.0 44.0 67.00 1.0 0.87 0.92 66.0 44.0 35.70 2.2 1.51 1.63 45.0 38.0 17.85 3.3 2.28 2.40 40.0 33.0 16.70 4.7 2.85 3.00 30.0 26.0 13.22 6.8 3.97 4.18 24.5 22.0 9.50 8.2 5.7 6.14 20.0 14.5 11.60 10 7.32 7.70 17.7 13.0 9.77 22 12.56 13.22 12.7 11.5 6.42 33 22.61 23.80 9.5 10.0 4.58 47 35.34 37.20 6.8 6.5 4.28 68 46.47 48.92 6.2 6.2 2.74 82 55.20 58.10 5.2 6.0 3.09 100 60.80 64.00 5.0 5.2 2.63 dimensions in inches (millimeters) value a 0.010 ( 0.254) b 0.010 ( 0.254) c 0.010 ( 0.254) d 0.005 ( 0.127) 0.47 h 0.351 (8.915) 0.244 (6.198) 0.160 (4.064) 0.079 (2.007) 1.0 h 0.487 (12.370) 0.172 (4.369) 0.096 (2.438) 0.071 (1.803) 2.2 h 0.487 (12.370) 0.172 (4.369) 0.096 (2.438) 0.071 (1.803) 3.3 h 0.464 (11.786) 0.179 (4.547) 0.111 (2.819) 0.063 (1.600) 4.7 h 0.464 (11.786) 0.179 (4.547) 0.111 (2.819) 0.056 (1.422) 6.8 h 0.522 (13.259) 0.147 (3.734) 0.085 (2.159) 0.056 (1.422) 8.2 h 0.427 (10.846) 0.245 (6.223) 0.082 (2.083) 0.050 (1.210) 10 h 0.427 (10.846) 0.245 (6.223) 0.082 (2.083) 0.050 (1.210) 22 h 0.450 (11.430) 0.226 (5.740) 0.079 (2.007) 0.039 (0.991) 33 h 0.477 (12.116) 0.197 (5.004) 0.080 (2.032) 0.035 (0.889) 47 h 0.435 (11.049) 0.247 (6.274) 0.072 (1.829) 0.031 (0.787) 68 h 0.435 (11.049) 0.247 (6.274) 0.072 (1.829) 0.031 (0.787) 82 h 0.458 (11.633) 0.227 (5.766) 0.070 (1.778) 0.028 (0.711) 100 h 0.458 (11.633) 0.227 (5.766) 0.070 (1.778) 0.028 (0.711) 0.755 0.005 (19.177 0.127) ? ?d? (2 plcs.) 0.165 0.030 (4.191 0.762) 0.300 (7.620) 0.050 (1.270) 0.344 0.010 (8.738 0.254) ?b? c a 22 h and lower a 33 h and higher 0.277 0.010 (7.036 0.254) b c ? 0.040 (1.016) no connection description IHTH-0750IZ-5A 1.0 h 20 % model inductance value inductance tolerance global part number ihth0750 izeb1r0m5a model size package code inductance value induct. tol. series
IHTH-0750IZ-5A www.vishay.com vishay dale revision: 15-feb-16 2 document number: 34348 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance graphs 0 20 40 60 80 100 0.00 0.10 0.20 0.30 0.40 0.50 0 30 60 90 120 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 0.47 h l t c 0 20 40 60 80 100 0.00 0.25 0.50 0.75 1.00 1.25 0 25 50 75 100 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 1.0 h l t c 0 20 40 60 80 100 0.0 0.5 1.0 1.5 2.0 2.5 0 10 20 30 40 50 60 70 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 2.2 h l t c 0 20 40 60 80 100 0.0 1.0 2.0 3.0 4.0 5.0 0 20 40 60 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 3.3 h l t c 0 20 40 60 80 100 0.0 1.0 2.0 3.0 4.0 5.0 0 10 20 30 40 50 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 4.7 h l t c 0 20 40 60 80 100 0 2 4 6 8 10 0 10 20 30 40 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 6.8 h l t c 0 20 40 60 80 100 0 2 4 6 8 10 0 5 10 15 20 25 30 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 8.2 h l t c 0 20 40 60 80 100 0 3 6 9 12 15 0 5 10 15 20 25 30 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 10 h l t c
IHTH-0750IZ-5A www.vishay.com vishay dale revision: 15-feb-16 3 document number: 34348 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance graphs 0 20 40 60 80 100 0 5 10 15 20 25 0 5 10 15 20 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 22 h l t c 0 20 40 60 80 100 0 8 16 24 32 40 0 5 10 15 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 33 h l t c 0 20 40 60 80 100 0 15 30 45 60 75 0 3 6 9 12 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 47 h l t c 0 20 40 60 80 100 0 15 30 45 60 75 0 3 5 8 10 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 68 h l t c 0 20 40 60 80 100 0 20 40 60 80 100 0 2 4 6 8 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 82 h l t c 0 20 40 60 80 100 0 25 50 75 100 125 0 2 4 6 8 temperature ( c) inductance (h) dc current (a) ihth0750iz-5a 100 h l t c
IHTH-0750IZ-5A www.vishay.com vishay dale revision: 15-feb-16 4 document number: 34348 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance graphs: inductance and q vs. frequency 0 25 50 75 100 125 150 0 0.25 0.5 0.75 1 1.25 1.5 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 0.47 h l q 0 40 80 120 160 200 0 1 2 3 4 5 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 1.0 h l q 0 60 120 180 240 300 0 4 8 12 16 20 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 2.2 h l q 0 40 80 120 160 200 0 6 12 18 24 30 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 3.3 h l q 0 50 100 150 200 0 10 20 30 40 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 4.7 h l q 0 40 80 120 160 0 20 40 60 80 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 6.8 h l q 0 40 80 120 160 200 0 1 2 3 4 5 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 8.2 h l q 0 20 40 60 80 100 0 20 40 60 80 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 10 h l q
IHTH-0750IZ-5A www.vishay.com vishay dale revision: 15-feb-16 5 document number: 34348 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance graphs: inductance and q vs. frequency 0 30 60 90 120 0 50 100 150 200 0.1 1 10 q inductance (h) frequency (mhz) ihth0750iz-5a 22 h l q 0 30 60 90 120 0 100 200 300 400 0.1 1 10 q inductance (h) frequency (mhz) ihth0750iz-5a 33 h l q 0 25 50 75 100 0 100 200 300 400 0.1 1 10 100 q inductance (h) frequency (mhz) ihth0750iz-5a 47 h l q 0 20 40 60 80 100 0 100 200 300 400 500 0.1 1 10 q inductance (h) frequency (mhz) ihth0750iz-5a 68 h l q 0 25 50 75 100 0 200 400 600 800 0.1 1 10 q inductance (h) frequency (mhz) ihth0750iz-5a 82 h l q 0 25 50 75 100 0 200 400 600 800 0.1 1 10 q inductance (h) frequency (mhz) ihth0750iz-5a 100 h l q
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
